100GbE CFP4 Fiber Optic Transceiver / SFP Transceiver Module For Network

100GbE CFP4 Fiber Optic Transceiver / SFP Transceiver Module For Network

FOCC CFP was designed after the Small Form-factor Pluggable transceiver (SFP) interface, but is significantly larger to support 100Gbps. The electrical connection of a CFP uses 10 x 10Gbps lanes in each direction (RX, TX). It offers a dense-port and high-throughput solution with low power consumption. The optical connection can support both 10 x 10Gbps and 4 x 25Gbps variants. CFP transceivers can support a single 100Gbps signal like 100GE or OTU4 or one or more 40Gbps signals like 40GE, OTU3, or STM-256/OC-768. 

CFP Different Type 

Physical Specification 

Feature 

Compliant to 100Gigabit Ethernet (100GbE) 100GBASE-LR4 & ITU-T G.959.1 4I1-9D1F; 
Laser Class 1; 
CFP2 MSA compliant; 
103.125 & 111.810 Gbit/s Dual Rate Operation; 
100GBASE-LR4 /4I1-9D1F: 10 km Reach; 
25.8/28.0 Gbit/s x 4 channel Electrical Interface (CEI-28G-VSR); 
1310 nm cooled EA-DFB LD; 
PIN Photo detector; 
Operation Case Temperature: 0 to 70°C; 
Low Power Consumption (12W max); 
MDIO Management Interface. 

Applications 

Dense wavelength division multiplexing (DWDM) systems; 

Metropolitan area network (MAN) systems; 

Internet Protocol (IP) switches and routers; 

Server and Storage Area Network (SAN) applications. 

Shipping By Those Follow Tools  Or Customized Demand 

FOCC Fiber Optic Transceiver Quality 

Notes: 

The CFP-MSA Committee has defined three form factors:

CFP - Currently at standard revision 1.4 and is widely available in the market; 
CFP2 - Currently at draft revision 0.3 is half the size of the CFP transceiver; these are recently
available in the market; 
CFP4 - Standard is not yet available, is half the size of a CFP2 transceiver, not yet available.